|
Utemad
|
 |
« on: March 25, 2011, 03:11:43 PM » |
0
|
White decals in reverse to replace the original oil / gen / temp and fuel. Exact copy of the original text.
$10 a set including postage.
Send me a pm if your interested.
Regards Brent 0415 467 300
|
|
|
|
|
Logged
|
|
|
|
FCV08
Senior Member
 Offline
Model: FC
Posts: 692
FE FC Club of QLD
|
|
« Reply #1 on: April 08, 2011, 07:33:35 PM » |
0
|
Gday Brent
Can you do the lettering in a different order i.e. Wilsonia Guage OIL/GEN/AMP or as I am attempting for the LHS setup, ENG/BRAKE/H'BR.
I am replacing the fuel guage with the three idiot lights (normally RHS) to match in to my V8 conversion.
My fuel guage is an aftermarket one to suit a VN Commodore sender unit.
Are you able to post a photo of your work?
Thanks
Craig D
|
|
|
|
|
Logged
|
|
|
|
|
Utemad
|
|
« Reply #2 on: April 13, 2011, 04:06:04 PM » |
0
|
Hi Craig, I can do them in a different order if you wish, also different colours. Heres a photo of my dash with new decals  |
|
|
|
|
Logged
|
|
|
|
|
Utemad
|
|
« Reply #3 on: April 13, 2011, 04:07:25 PM » |
0
|
and of the other side  |
|
|
|
|
Logged
|
|
|
|
FCV08
Senior Member
Offline
Model: FC
Posts: 692
FE FC Club of QLD
|
|
« Reply #4 on: April 13, 2011, 04:50:13 PM » |
0
|
Brent
May seem a dumb question but are these on the inside of the glass?
Thanks
|
|
|
|
|
Logged
|
|
|
|
|
Utemad
|
|
« Reply #5 on: April 13, 2011, 05:42:11 PM » |
0
|
Yep, the hard part is getting them straight!  |
|
|
|
|
Logged
|
|
|
|
|
TTV6FC
|
|
« Reply #6 on: April 15, 2011, 08:56:19 PM » |
0
|
|
|
|
|
|
Logged
|
Run your fingers over my Holden and I'll run my Holden over your fingers!!!!
|
|
|
FCV08
Senior Member
Offline
Model: FC
Posts: 692
FE FC Club of QLD
|
|
« Reply #7 on: November 04, 2011, 11:46:11 PM » |
0
|
Brett
Just wondering if you can still make up the lettering?
I need the OIL/TEMP/GEN for the WIlsonia Guage and ENG/BRA/HBR for the other side.
Please PM me with the price.
Thanks
Craig D
|
|
|
|
|
Logged
|
|
|
|
FCV08
Senior Member
Offline
Model: FC
Posts: 692
FE FC Club of QLD
|
|
« Reply #8 on: May 14, 2012, 08:16:20 PM » |
0
|
Brent
Are you still doing the guage lettering>
Cheers
Craig D
|
|
|
|
|
Logged
|
|
|
|
Stash
nsw-club
Senior Member
Offline
Model: FC
Posts: 334
Sydney, NSW
|
|
« Reply #9 on: May 14, 2012, 10:59:04 PM » |
0
|
Craig
I would pm him.
From all accounts he does check site often an a pm will at least notify him.
Cheers
John
|
|
|
|
|
Logged
|
|
|
|
FCV08
Senior Member
Offline
Model: FC
Posts: 692
FE FC Club of QLD
|
|
« Reply #10 on: May 15, 2012, 10:01:53 PM » |
0
|
Thanks John
Sent a text and got all organised.
Cheers
Craig D
|
|
|
|
|
Logged
|
|
|
|
|
black57
|
|
« Reply #11 on: June 06, 2012, 04:59:45 PM » |
0
|
Hi guys,
I'm doing mine at the moment, but I have about 10 sets of gauges and a couple of wilsonias too, and no 2 have the letters in the EXACT same place or the EXACT same size. Even looking through this thread there are differences, E&F sizes etc. 2 of mine don't even have the word fuel on them.
Does anyone have info on the EXACT size and position?
Pinky.
|
|
|
|
|
Logged
|
A car on the road is worth 2 in the shed...
FE Standard rat rod
MG Midget
1965 GSM Dart - ex race car
1948 Singer 9
2 1960s custom fiberglass race cars
And a couple of Cyclekarts underway
|
|
|
|
Utemad
|
|
« Reply #12 on: June 07, 2012, 07:17:27 PM » |
0
|
Hey Pinky,
I took the measurements from my original guages in my 80,000 mile ute. These were an exact match in every way. I guess there were a number of different templates used in the production line, if you prefer a different version to those in the photos above I can make you a custom set.
Regards Brent
|
|
|
|
|
Logged
|
|
|
|
Stash
nsw-club
Senior Member
Offline
Model: FC
Posts: 334
Sydney, NSW
|
|
« Reply #13 on: June 07, 2012, 07:21:27 PM » |
0
|
Utemad.
The ones u sent me had slightly different spacings to the original. So I split the transfer.
Must have had different templates in the day..
|
|
|
|
|
Logged
|
|
|
|
|
black57
|
|
« Reply #14 on: June 08, 2012, 11:44:06 PM » |
0
|
Thanks Brent,
But I'm making mine own. Just needed to know if there was an exact position recorder by GM somewhere.
Pinky.
|
|
|
|
|
Logged
|
A car on the road is worth 2 in the shed...
FE Standard rat rod
MG Midget
1965 GSM Dart - ex race car
1948 Singer 9
2 1960s custom fiberglass race cars
And a couple of Cyclekarts underway
|
|
|
|
FireKraka
|
|
« Reply #15 on: October 12, 2012, 12:33:48 PM » |
0
|
Hey Brent do you still have any of the lettering available
Regards
Neil
|
|
|
|
|
Logged
|
|
|
|
pbh0069
sa-club
Full Member
Offline
Model: FE
Posts: 147
|
|
« Reply #16 on: October 12, 2012, 01:10:31 PM » |
0
|
Hi Brent, would like to get a set as well if you have any cheers Phil.  |
|
|
|
|
Logged
|
|
|
|
|
