FE-FC Holden Discussion Forum
May 17, 2024, 08:46:42 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > For Sale and Wanted > Reproduction Parts (Moderators: RET, Glenn 'Stinky' Stankevicius) > rear quarter vent window rubbers
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: rear quarter vent window rubbers  (Read 10006 times)
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« on: December 31, 2009, 12:02:53 PM »
0
Rare Spares have now remade the rear quarter vent window rubbers to original specification. Up until now they were FJ ones which had been cut and joined to suit and were the wrong profile at the bottom.
These are very good items and are now available



Ken
Logged
FCV08
Senior Member
****
Offline Offline

Model: FC
Posts: 692


FE FC Club of QLD


View Profile
« Reply #1 on: December 31, 2009, 12:49:29 PM »
0
Thanks Ken

Finally they have been reproduced.

I will chase up in Brissie somewhere.

Cheers

Craig
Logged
zulu
nsw-club
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1860


Old Boonah Ambo


View Profile
« Reply #2 on: December 31, 2009, 02:50:07 PM »
0
That is good news, are they going to do the wagon version as well ?
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #3 on: December 31, 2009, 03:39:25 PM »
0
Not at this stage - but I can push it

Ken
Logged
Stewy
sa-club
Senior Member
****
Offline Offline

Model: FE
Posts: 881


FErgus 1957 FE Special Station Sedan


Jeff Stewart
View Profile
« Reply #4 on: December 31, 2009, 07:53:07 PM »
0
Please do Ken, it would make FErgus happy Smiley
Logged
No matter how much you push the envelope, It'll still be stationery
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #5 on: January 06, 2010, 08:00:33 PM »
0
The news is that wagon rear door quarter vent seals are available upon order from Rare Spares. They are not an "off the shelf" item.
They are made from cutting sedan rubbers, linishing the join and then gluing them together.

Ken
Logged
zulu
nsw-club
Guru
*****
Offline Offline

Model: FE and FC
Posts: 1860


Old Boonah Ambo


View Profile
« Reply #6 on: January 06, 2010, 10:23:15 PM »
0
Sounds good, thanks for chasing that up, I'll see how I go ordering it
Logged
stapla
Full Member
***
Offline Offline

Model: FE
Posts: 197

I love YaBB 1G - SP1!


View Profile
« Reply #7 on: January 30, 2010, 01:57:44 PM »
0
Ken do you have the part numbers for left and right rear rubbers (sedan)

On the RS website it has  RRQS103 and  RRQS104 which looks different to your picture.

Cheers
Peter.
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #8 on: January 30, 2010, 05:07:20 PM »
0
The numbers on the samples I have say "RFQ 5055" & "RFQ 5054" I think these are "request for quote" numbers. Also on the tag is the part number 7410903 which is the left hand part number - So I would expect that they will be listed on the Rare Spares catalogue now with the original part numbers.

Ken
Logged
stapla
Full Member
***
Offline Offline

Model: FE
Posts: 197

I love YaBB 1G - SP1!


View Profile
« Reply #9 on: February 15, 2010, 08:47:15 PM »
0
Hi can anyone confirm the little flappy bit goes to the ouside of the car ? I assume this bit makes sure the water and dust does sit between the rubber and door ?

Cheers
Peter
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #10 on: February 15, 2010, 10:50:11 PM »
0
You are correct

Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.035 seconds with 19 queries.